Threshold Design Lab
What Does an Interior Designer Do Between the Mood Board and Move-In?

What Does an Interior Designer Do Between the Mood Board and Move-In?

Ten days into a bathroom renovation, the tile setter calls with a question nobody thought to ask: should the shower niche line up with the grout joint or with the valve? A small detail, and one you will see every morning for the next twenty years. Ask what does an interior designer do once the mood boards are finished, and that phone call is a fair answer. A good designer has already decided the niche, drawn it, and is there to confirm it when the question comes up.

Most people picture the visible part of the job: color, furniture, fabric, the finished photograph. On a renovation, those choices sit on top of a much larger body of work that happens on paper and on site, and each piece of it produces something you can hold, review and sign off on at a specific point in the project.

It starts with a conversation, not a sketch

Before anything is drawn, a designer needs to understand how you live. Who cooks, and how often at the same time? Where do coats and bags land when you walk in? Which rooms feel wrong now, and is it the layout, the light or the storage?

At Threshold Design Lab, this listening stage shapes everything that follows. Your voice guides the project, and the brief is written around the way you use your home, not around a style label. A thorough brief also defines the scope: which rooms, which walls might move, what stays and what goes. Scope is the first of many interior designer responsibilities, because every later drawing and budget line depends on it.

The space plan: deciding where everything goes

A space plan is a measured floor plan showing walls, openings, built-ins, furniture and the routes people take through the room. On it, the designer works out whether the island fits with stools on one side, whether the door swing collides with the vanity, and whether the dining table can seat eight without anyone backing into a wall.

For a drawing that looks so plain, the space plan carries a lot of weight. Changes are easy and inexpensive on paper. The same change after framing involves demolition, rescheduled trades and new materials. Many of a renovation’s expensive mistakes are caught, cheaply, at this stage.

Elevations: what you will see standing in the room

Where a plan looks down on the room, an elevation faces one wall at eye level, the way you will experience it. Elevations set cabinet heights, the alignment of a hood with the range below, the reveal between a countertop and a window sill, the placement of sconces relative to a mirror.

Elevations are where proportion gets resolved. They also expose conflicts the plan cannot show, like an upper cabinet that would collide with existing window trim. Tradespeople build from these drawings, so their precision directly shapes the finished room.

Selections and the itemized budget

With layout and elevations settled, the designer selects materials and products: flooring, tile, stone, plumbing fittings, lighting, hardware, paint, cabinetry finishes, and furnishings where they are part of the scope. Each selection is specified with the detail a supplier or installer needs, such as size, finish, quantity and any installation requirements.

Those selections feed an itemized budget. Itemized is the important word. A lump-sum total tells you very little, while a line-by-line budget shows exactly where your money is going and lets you make informed tradeoffs: a simpler tile in the laundry room to afford the stone you love in the kitchen, for example. The budget stays tied to the selections, so it moves when they move.

Ordering and coordination: the phase most people never see

Once you approve the design, someone has to buy everything, in the right order, from the right sources, and make sure it arrives when the trades need it. This is procurement, and it is one of the least visible but most valuable services interior designers offer.

Lead times drive the sequence. Custom cabinetry, special-order fixtures and some lighting can take far longer than the installation itself, so they are ordered first. The designer tracks each order, coordinates with vendors and subcontractors, and keeps the schedule realistic. If a product is discontinued or delayed, the designer finds an alternative that holds the design together, so the choice never falls to whoever happens to be on site that day.

Curious which of these deliverables your own project calls for? Our first consultation costs nothing. Request a time with our designers, in person or by video, and we will sketch out how the work would be staged for your rooms.

On site: where design meets construction

During construction, the designer’s job shifts from drawing to protecting what was drawn. That means site visits, answering technical questions from the trades, reviewing work as it progresses and resolving the inevitable surprises that come with opening walls in an older home.

Firms differ most at this stage, and the line between design and execution shows up plainly. In some arrangements, the designer hands over the drawings and steps back, visiting occasionally. In a design-build model, the same team carries the project through installation. At Threshold Design Lab, the studio handles project management itself, coordinating licensed plumbers and electricians and keeping the build aligned with the plan, so the person who answers your call about a tile delay is the one who drew the elevation that tile belongs to. Questions that would otherwise travel between three parties get answered in one conversation, and because the people who drew the room also understand how it is built, a site problem often turns into a better detail, such as storage tucked into a wall cavity the demolition uncovered.

That continuity is the core idea behind full-service interior design: one team responsible from first sketch to final walkthrough.

Where design ends and execution begins

It helps to think of a renovation in three phases, because it clarifies how interior designers work and where their role changes.

Design and planning produces the space plans, elevations, material selections and itemized budget. The designer leads, and you make the decisions.

Procurement and curation turns approved selections into orders, a schedule and a coordinated set of vendors and subcontractors. The designer manages, and you are kept informed.

Execution and installation is the build. In a full-service model, the designer or project manager oversees the work, resolves technical questions and guides the project to completion. In a design-only model, a separate contractor takes responsibility here, and the designer’s involvement is usually limited to observation.

Knowing which model you are signing up for avoids misunderstandings later. If you assume the designer is managing the site and they assume the contractor is, decisions fall through the gap. You can see how our studio structures this on our residential interior design and remodeling services page.

What you should expect to receive

A useful way to evaluate any designer is to ask what you will physically hold at the end of the design phase. For a renovation, that typically includes a measured space plan, elevations of the key walls, a schedule of selections with specifications, and an itemized budget. On larger projects, it may also include lighting plans and millwork drawings.

Ask to see examples from completed work. Our project gallery shows finished rooms, and the documents behind those rooms are what made them possible. The story of our studio explains the background in design, remodeling and millwork that shapes how we document a project.

The short version

On a renovation, an interior designer listens, plans, documents, budgets, orders, coordinates and oversees. The finished look gets the photographs, but it only holds up because of the plans, the purchasing and the problem-solving on site that nobody photographs.

Planning a renovation and hoping one team can carry it from the first measured plan to the last installed fixture? Get in touch with Threshold Design Lab or call the studio at (773) 433-0042, and tell us which rooms are on your list.

Frequently Asked Questions

Do interior designers handle permits?

Permit requirements depend on the scope and the building, so they are discussed and handled case by case. Ask any designer at the outset who will own that conversation. On a design-build project it usually sits with project management, which keeps the homeowner from relaying questions between the building, the city and the trades.

Can I hire an interior designer for just one room?

Yes. A single kitchen, bath or living room can be a complete project, and the same deliverables apply at a smaller scale: a plan, elevations where walls are being built or changed, selections and a budget.

How involved do I need to be during the project?

Expect to be most involved during design, when you are making decisions about layout and materials. Once selections are approved, a full-service designer carries most of the coordination, and your role becomes reviewing progress and answering occasional questions.

Does an interior designer replace a contractor?

In a design-only arrangement, no; you still hire a builder separately. In a design-build arrangement, the firm manages construction directly, using licensed trades for plumbing and electrical work.

What is the difference between an interior designer and a project manager?

The designer decides what the space should be and documents it. The project manager makes sure it gets built that way, on schedule, by coordinating trades and deliveries. In a full-service studio, the two roles work side by side on every project.

←A Condo Kitchen Remodel That Leaves the Mechanicals in PlaceTudor Style Interior Design That Lets a North Shore Tudor Stay a Tudor→